Preparing For The Software Update; Migration Of Cas Databases To The Process Historian; Overview Of Adaptations For Central Archiving; How To Detach Attached Archive Segments On The Central Archive Server - Siemens SIMATIC PCS 7 Service Manual

Process
Hide thumbs Also See for SIMATIC PCS 7:
Table of Contents

Advertisement

Preparing for the software update

5.1

Migration of CAS databases to the Process Historian

5.1.1

Overview of Adaptations for Central Archiving

Central archive server (CAS)
The Central Archive Server (CAS) is not released for PCS 7 V8.1 or higher.
Replace the CAS with a Process Historian.
The migration of archive data from a central archive server is available as of PCS 7 V7.0
(StoragePlus V1.2).
If archive data is to be available after the software update, pay particular attention to the section
"How to Detach Attached Archive Segments on the Central Archive Server (Page 27)".
Additional information
You can find information on this in this documentation and in the documentation on the Process
Historian:
● system manual
● Installation manual
5.1.2

How to Detach Attached Archive Segments on the Central Archive Server

Requirements
● Before you run the software update, perform these steps directly on the archive server
(Central Archive Server (CAS), or StoragePlus Server).
● You are authorized to access the Windows user interface on the CAS.
Procedure
1. In the Windows Start menu, select the "Administration Console" command from the
SIMATIC > StoragePlus submenu.
2. In the detail view, click "Detach".
The catalog of all linked archive segments which have already been swapped out is
displayed.
3. Select an archive segment you wish to remove from the archive.
Software update without utilization of new functions
Service Manual, 03/2016, A5E36200133-AA
SIMATIC; Process Historian Administration , "Migration" section
SIMATIC; Process Historian Installation Notes
5
27

Advertisement

Table of Contents
loading

Table of Contents