Advantages of fault-tolerant components
4.5 Operator stations
19.In the component view, select the SIMATIC PC station and double-click the "Configuration"
20.If the hardware catalog is not visible, select the menu command View > Catalog.
21.Select the WinCC application WinCC CAS Appl. (stby) in the hardware catalog under
22.Select the menu command File > Save and exit HW Config.
Result
Your project should now correspond to the project shown in the following figure. You can
change the names of the components as you wish.
132
object in the detail window.
The hardware configuration of the SIMATIC PC station opens.
The hardware catalog opens.
"SIMATIC PC Station > HMI..." and insert it in the configuration table by means of drag-and-
drop.
Fault-tolerant Process Control Systems (V8.0)
Function Manual, 03/2012, A5E02779471-02