Siemens SIMATIC PCS 7 Function Manual page 159

18.Under "SIMATIC PC Station > Route Control ..." in the hardware catalog, select "RC
19.If redundant communication processors are installed for each PC station, repeat steps 8
20.Select the menu command File > Save and exit HW Config.
Result
The following figure shows an example configuration of a SIMATIC PC station with Route
Control application (stby):
Fault-tolerant Process Control Systems (V8.0)
Function Manual, 03/2012, A5E02779471-02
application (stby)" and insert it in the configuration table by means of drag-and-drop.
and 9 for the second communication processor.
Advantages of fault-tolerant components
4.7 SIMATIC Route Control stations
159