Remote Commander - Sony CCD-TR930 Operating Instructions (primary manual) Operating Instructions Manual

Identifying the parts
To watch the demonstration
You can start the demonstration by setting DEMO MODE in the menu system.
You can also start the demonstration by the following operation.
To enter demo mode
(1) Eject the cassette and set the POWER switch to VTR.
(2) Turn STANDBY up.
(3) While holding down · set the POWER switch to CAMERA.
To exit demo mode
(1) Set the POWER switch to VTR.
(2) Turn STANDBY up.
(3) While holding down π set the POWER switch to CAMERA.

Remote Commander

The buttons that have the same name on the Remote Commander as on the camcorder
function identically.
1 Transmitter
Point toward the remote sensor to
control the camcorder after turning
on the camcorder.
2 Tape transport buttons (p.20)
66
1
2
3
4
5
3 DISPLAY button (p.20)
4 START/STOP button (p.11)
5 Power zoom button (p.14)