Making Your Own Titles - Sony CCD-TR930 Operating Instructions (primary manual) Operating Instructions Manual

Making your own titles

You can make up to two titles and store them in the camcorder. Eject the cassette before
you begin. Your title can have up to 22 letters.
(1) While the camcorder is in Standby mode, press MENU to display the menu.
(2) Turn the control dial to select TITLE1 SET or TITLE2 SET, then press the dial.
(3) Turn the control dial to select the desired character, then press the dial.
To move the cursor to the character on the left side, select M.
(4) Repeat step 3 until you finish the title.
(5) When you are finished, turn the control dial to select
(6) Press MENU to erase the menu display.
1
MENU
To edit the title you have stored
In step 2, select TITLE 1 SET or TITLE 2 SET, whichever title you want to edit is stored
in. Then change the title.
If you do nothing more than 5 minutes while a cassette is in the camcorder
The power goes off automatically. Turn STANDBY down once, turn it again up and
proceed from step 1.
When you enter 22 letters in step 4
The title is stored automatically. (You do not need to got to step 5.)
To delete a title
At the leftmost character position, select
title by selecting empty spaces. If you do so, a title full of empty spaces is stored.
40
2
MENU
ORC TO SET
REC MODE
TITLE COL
TITLE POS
TITLE LANG
TITLE1 SET
TITLE2 SET
[MENU]: END
3
MENU
Â
C
D
– – – – – – >
TITLE1 SET N E
F
G
µ
[MENU]: END
– – – – – – >
5
and press the control dial. Do not erase the
, then press the dial.
MENU
Â
L
M
– – – – – – – >
TITLE1 SET N
O
P
µ
[MENU]: END
MENU
Â
–
•
>
TITLE1 SET NEW YORK
A
µ
[MENU]: END