Using The Remote Commander - Sony CCD-TR930 Operating Instructions (primary manual) Operating Instructions Manual

Playing back a tape
You can monitor the playback picture in the viewfinder. You can also monitor a picture
on a TV screen, after connecting the camcorder to a TV or VCR.
(1) While pressing the small green button on the POWER switch, set it to VTR.
The video control buttons light up.
(2) Insert the recorded tape with the window facing out.
(3) Press 0 to rewind the tape.
(4) Press · to start playback.
1
POWER
CAMERA
OFF
VTR
PLAY
REW
FF
STOP
PAUSE SLOW
DISPLAY
To stop playback, press π.
To rewind the tape, press 0.
To fast-forward the tape rapidly, press ).

Using the remote commander

You can control playback using the supplied Remote Commander. Before using the
Remote Commander, insert the size AA (R6) batteries.
To display the viewfinder screen indicators on the TV
Press DISPLAY on the Remote Commander. To erase the indicators, press DISPLAY
again.
To monitor the sound while viewing the playback picture in the viewfinder
Connect headphones (not supplied) to the 2 jack.
Note on the lens cover
The lens cover does not open when the POWER switch is set to VTR. Do not open the
lens cover manually. It may cause malfunction.
20
2
3
REW
4
PLAY