Basic Operations Camera Recording - Sony CCD-TR930 Operating Instructions (primary manual) Operating Instructions Manual

Basic operations
Camera recording
Make sure that the power source is installed, a cassette is inserted and that the START/
STOP MODE switch is set to
make a trial recording to make sure that the camcorder is working correctly.
When you use the camcorder for the first time, power on it and reset the date and time
to your time before you start recording. (p.47)
The date is automatically recorded for 10 seconds after you start recording (AUTO
DATE feature). This feature works only once a day.
To save battery power, the picture in the viewfinder appears only when you bring your
face close to the viewfinder with STANDBY up (Finder power save).
(1) While pressing the small green button on the POWER switch, set it to
CAMERA.
(2) Turn STANDBY up.
(3) Press START/STOP. The camcorder starts recording. The "REC" indicator
appears. The camera recording/battery lamps located on the front light up.
The AUTO DATE indicator appears.
You can also select Recording mode, SP (standard play) mode or LP (long play) mode.
Set REC MODE in the menu system according to the length of your planned recording
before you start.
1
POWER
CAMERA
OFF
VTR
. Before you record one-time events, you may want to
2
START/STOP
3
START/STOP
STBY
S P
0:00:00
40 min.
AUTO DATE
REC
0:00:01
40 min.
11