Playing Back A Tape - Sony Handycam CCD-TR2300 Operating Instructions Manual

Playing back a tape

You can monitor the playback picture in the viewfinder. You can also monitor a picture
on a TV screen, after connecting the camcorder to a TV or VCR.
(1) While pressing the small green button on the POWER switch, set it to VTR.
The tape transport buttons light up.
(2) Insert the recorded tape with the window facing out.
(3) Press · to start playback.
1
POWER
CAMERA
OFF
VTR
3
PLAY
REW
7
P PAUSE
r REC
To stop playback, press π.
To rewind the tape, press 0.
To fast-forward the tape rapidly, press ).
Using the remote commander
You can control playback using the supplied Remote Commander. Before using the
Remote Commander, insert the size AA (R6) batteries.
Using the Edit Station
— CCD-TR3300 for Canadian model only
You can control playback using the buttons and jog dial on the Edit Station. To use the
jog dial, turn the shuttle ring clockwise or counterclockwise to point the desired
indication around the ring. When using the Remote Commander with the Edit Station,
set COMMAND MODE on the Edit Station to VTR 2.
To display the viewfinder screen indicators on the TV
Press DISPLAY on the Remote Commander. To erase the indicators, press DISPLAY
again.
To monitor the sound while viewing the playback picture in the
viewfinder
Connect headphones (not supplied) to the 2 jack.
3
STOP REW PLAY
3 PLAY # FF
STOP
7
SLOW & 2
DISPLAY
CCD-TR2300/TR3300
2
FF PAUSE REC
3-856-204-23 (1)
19