Editing Onto Another Tape - Sony Handycam CCD-TR2300 Operating Instructions Manual

Writing the RC Time code on a recorded tape
Note on --:--:--:-- indicator
The --:--:--:-- indicator appears during playback if:
• nothing is recorded.
• the RC time code is unreadable because of the damage of the tape or because of the
noise.
• you recorded using another VCR without RC time code function.
• you erase the index signal or make PCM after recording on another VCR in the
portion on which the RC time code is written.
In this case, we recommend you to rewrite the RC time code.

Editing onto another tape

You can create your own video program by editing with any other h 8 mm, H Hi8,
j VHS, k S-VHS,
VCR that has video/audio inputs.
Before editing
Connect the camcorder to the VCR as described in "Connections for playback" on page
16.
Set the input selector on the VCR to LINE, if available.
(1) While pressing the small green button on the POWER switch, set it to VTR.
(2) Set EDIT to ON in the menu system.
1
POWER
CAMERA
VTR
: Signal flow
72
VHSC,
OFF
2
1
S-VHSC, l Betamax or ¬ ED Betamax
K
2 3
MENU
CCD-TR2300/TR3300
MENU
EDIT OFF
ON
[MENU] : END
3-856-204-23 (1)