Searching the boundaries of recorded date
You can search for the boundary between recording dates using the Date Code
automatically recorded on the tape.
There are two modes:
• Searching for the beginning of a specific date, and playing back from there (Date
Search)
• Searching for the beginning of all days, one after another, playing back about 10
seconds of each (Date Scan)
Each time you press DATE SEARCH, the mode changes as follows:
Date Search n Date Scan n nothing
To search for the beginning of a specific date
(1) Set the POWER switch to VTR. The tape transport buttons light up.
(2) Press DATE SEARCH on the Remote Commander.
(3) When the current position is [b], press 0 to search towards [a] or press )
to search towards [c].
To scan the beginning of all days
(1) Set the POWER switch to VTR.
(2) Press DATE SEARCH on the Remote Commander twice.
(3) Press 0 or ). Date Scan starts.
JUL. 3 1996
[a]
1
POWER
CAMERA
OFF
VTR
To stop searching or scanning
Press one of the following tape transport buttons: ·, π, 0 or ).
To view pictures during searching or scanning
Press · and then press 0 or ).
JUL. 4 1996
[b]
[c]
2
SEARCH
DATE
CCD-TR2300/TR3300
JUL. 7 1996
INDEX
DATE
SEARCH
Display window
DATE SEARCH
3
REW
3
#
FF
0
)
3-856-204-23 (1)
65