Overlapping Two Pictures (Ccd-Tr3300 Only) - Sony Handycam CCD-TR2300 Operating Instructions Manual

Overlapping two pictures
(CCD-TR3300 only)
When you switch from one scene to another, you can overlap the two pictures. With
this function, the first scene turns to the second one gradually.
You can hear the sound of the second scene gradually as you start recording the second
scene.
(1) While the camcorder is in Standby mode, press FADER/OVERLAP repeatedly
so that the OVERLAP indicator appears in the viewfinder.
(2) Press START/STOP to record the next scene. The OVERLAP indicator
disappears after the overlapping.
1
FADER
FADER/OVERLAP
M.FADER
OVERLAP
WIPE
Notes on overlap
• You cannot use the following functions while using the overlap function. Also, while
using the following functions, you cannot use the overlap function.
– Digital effect
– Slow shutter
– Title
• When you select the overlap function after using the following operations , the
camcorder memorizes the image on the tape. As the image is being memorized, the
OVERLAP indicator flashes quickly, and the picture you are shooting disappears
from the viewfinder. You may not record a clear picture depending on the condition
of the tape.
– Turn STANDBY down
– Set the POWER switch to OFF
– Eject a tape
– Edit search
– Fading out
– Digital effect
– Slow shutter
– Title
OVERLAP
CCD-TR2300/TR3300
2
31
3-856-204-23 (1)