Table of Contents
Advertisement
Figure 3-1 Recommended Clearances - HyperPool Shaker
MOVING/POSITIONING THE EQUIPMENT
WARNING! USE SPREADER BARS TO PREVENT DAMAGE WHEN LIFTING
THE EQUIPMENT.
WARNING! TO ENSURE PROPER BALANCE AND ORIENTATION WHEN
UNIT IS RAISED AND PREVENT DAMAGE TO COMPONENTS, ATTACH
LIFTING SLINGS ONLY TO LABELED LIFTING POINTS. DO NOT ATTEMPT
LIFTING BY ATTACHMENT TO ANY OTHER LOCATION.
WARNING! BE SURE THAT HANDLING DEVICES HAVE SUFFICIENT
LIFTING CAPACITY TO SAFELY HANDLE THE WEIGHT OF THE
EQUIPMENT.
WARNING! DO NOT REMOVE SHIPPING BRACKETS UNTIL EQUIPMENT
HAS BEEN POSITIONED AT FINAL INSTALLATION SITE.
WARNING! WHEN USING AN OVERHEAD LIFTING DEVICE, USE ALL FOUR
LIFTING LUGS PROVIDED.
The shaker and desilter and desander, if included, are separately skidded for shipment and must
be assembled at the installation site. A label indicating the weight of each unit was affixed to the
equipment. Refer to Section 8 for dimensions and other specifications.
15 Jun 12
INSTALLATION
3-3
HyperPoolShaker
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HYPERPOOL SHAKER and is the answer not in the manual?