User Parameters - Adam AE-202 User Manual

8.0

USER PARAMETERS

Switch the power to off. Press and hold [Acc /
power again. The factory parameters will be skipped and user function
parameters will be displayed for setting.
Please see the full AE 202 User manual for access to factory parameters.
Switch the power to off. Press and hold [Acc /
power again. The factory parameters will be skipped and user function
parameters will be displayed for setting.
• If you enter this section, the user functions will be displayed in the
format "F - AbCdE" The related functions are listed below.
• Press [Acc /
• Press the [x10 /Inc] key to change the options. (0 or 1).
• Press [Acc /
• Once all the values are entered, press [Kg/lb /Set] to move to the
next parameter for setting the filter.
A = 0:
No auto power off function
A = 1:
With auto power off function (If the weighing value does not
change in 15 minutes, the indicator will be turned power off)
b = 0:
No unit switch to lbs
b = 1:
With unit switch enabled
c = 0:
No count function
c = 1:
With count function enabled
d = 0:
No accumulation function.
d = 1:
With accumulation function enabled.
E = 0:
No high resolution display function
E = 1:
With high resolution X10 display function enabled.
©Adam Equipment Company 2008
]. The first digit will start flashing.
] to move to the next digit.
15
] and switch on the
] and switch on the