Index Introduction ................3 Service Centre ..............3 Intended use ............... 4 Package content ..............4 System presetting ..............4 Technical data ..............4 Commissioning ..............5 Description of the transmitter control functions ..... 5 Declaration of conformity ............6 Notes on environmental protection ........
Thank you very much for purchasing the Graupner Sim-Control 6. This Graupner Sim-Control 6 is extremely versatile. This manual is valid for all the Graupner Sim-Control 6 listed on the cover sheet. Read this manual carefully to achieve the best results with your Graupner Sim-Control 6 and first of all to safely control your mod- els.
Intended use The Graupner Sim-Control 6 is a six channel controller that can be connected to a PC by USB cable to use flight simulators, as Reflex XTR, G3-G4.5, APD and Phoenix RC. The Graupner Sim-Control 6 is suitable for airplane, glider, copter and helicopter models simulators.
Check then all the controls) Plug the USB connector of the controller to a free USB port of your PC. Switch the Sim-Control 6 on by the On/Off switch. Launch the already installed simulator in your PC and follow the soft- ware instructions.
8. Aileron trim 9. Elevator/aileron stick 10. Elevator trim 11. 2 way switch 12. USB connection cable Declaration of conformity Graupner declares that the product is conform to EU norms. EN 55022:2010/AC:2011 EN 55024:2010 EN 61000-3-2:2014 EN 61000-3-3:2013 6 - 8...
The present construction or user manual is for informational pur- poses only and may be changed without prior notice. The cur- rent version can be found on the Internet at www.graupner.de on the relevant product page. In addition, the company Graupner has no responsibility or liability for any errors or inaccuracies that may appear in construction or operation manuals.