Operation; Normal Operation - Scilogex D2012 User Manual

High speed mini micro-centrifuge
Table of Contents

Advertisement

8. Operation

CAUTION
● Do not push or lean against the centrifuge while it is running.
● Do not run the centrifuge when fragments or sample solutions are left in the centrifuge chamber. Always keep the
centrifugal chamber clean.
● If the centrifuge makes strange noise during operation, stop it immediately and contact our service center. Notify
them of the warning code if displayed.

8.1 Normal operation

Turn on the power switch, centrifuge will display the running interface last time after passing the self-diagnostic
checks, see figure 8-1 below:
● Speed: 15000rpm. Running time: 12 minutes.
● The door lock is released.
8.1.1 Rotor loading and removal
CAUTION
●Attach the rotor to the rotor shaft. Ensure the rotor is in position and connected with the shaft, tightening the
locking nut to secure the rotor with shaft, to prevent the rotor damaging the centrifuge.
●Ensure the rotor lid is firmly tightened to the rotor.
www.scilogex.com
Speed area
Door status
×100rpm
Figure 8-1 The last running interface
D2012 High Speed Mini Micro-Centrifuge
Time area
min
Page 11

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D2012 and is the answer not in the manual?

Table of Contents