Resetting Parameters To Factory Settings; Operating Modes; Operation Mode Of Ms-H-Pro; Operation Mode Of Ms-Pro - Scilogex MS-H-Pro User Manual

MS-(H)-Pro Digital（Hotplate）Magnetic Stirrer
Items
Operating mode
Setting temperature (°C )
SAFE (℃ )
Setting rotary speed (rpm)
Residual heat warning
Stirring bar breakaway monitoring
Table 4

6.3 Resetting parameters to factory settings

Reset the parameters to the default settings, as follows:
• Turn off by the power switch'O/I'to'O'
• Have the keys "Set" and "Mode" pressed down at
the same time and switch on the main O/I switch. Release
buttons after 5 seconds.
• The unit is now set to the factory default settings.

7 Operating modes

7.1 Operation modes of MS-H-Pro:
Operation mode A
MS-H-Pro has heating and stirring functions.
●
Users can control on the front panel or by remote PC.
●
Residual temperature warning, safe temperature limit and
●
stirring bar breakaway monitoring can be set in this mode.
Default settings
A
Operation mode B
25
350
●
100
●
On
●
stirring bar breakaway monitoring can be set in this mode.
OFF
Operation mode C
●
functions before the last switching off (mains OFF), as well
as the data set last can be changed.
●
temperature sensors.
●
and stirring bar breakaway monitoring can't be set in this
mode.
7.2 Operation modes of MS-Pro:
Operation mode A
●
●
●
mode.
8
MS-H-Pro has heating and stirring functions.
Users can control on the front panel or by remote PC.
Residual temperature warning, safe temperature limit and
MS-H-Pro maintains the state of the heating and stirring
Remote control can be used without supporting external
Residual temperature warning, safe temperature limit
MS- Pro has heating and stirring functions.
Users can control on the front panel or by remote PC.
Stirring bar breakaway monitoring can be set in this