Vhf/Uhf Configuration, Multiple Dsps With No Delay - Agilent Technologies E3238S Installation And Configuration Reference

Hardware Installation

VHF/UHF Configuration, Multiple DSPs with no Delay

The following two configurations shown are that of a system with one E1439D ADC and two
or three E9821A DSP modules, configured for search with no delay. See
configuration daisy-chains the DSPs through their A section XMT and RCV sockets.
The upper part of
connects to the first DSP's A section Rcv socket. The first DSP's A section XMT socket is
connected to the second DSP's A section Rcv socket. The second DSP's A section XMT
socket loops back to the ADC's FPDP RCV socket.
Figure 19.
FPDP Cables for
VHF/UHF, Two or
Three DSPs
The lower part of
connects to the first DSP's A section Rcv socket. The first DSP's A section XMT socket is
connected to the second DSP's A section Rcv socket. The second DSP's A section XMT
socket is connected to the third DSP's A section RCV socket. The third DSP's A section
XMT socket finally loops back to the ADC's FPDP RCV socket.
For configuring multiple DSPs with Delay, see
with Delay" on page 33
32
figure 19 shows a two-DSP configuration. The ADCs XMT socket
figure 19 shows a three-DSP configuration. The ADCs XMT socket
"VHF/UHF Configuration, Multiple DSPs
figure 19. This