Hirschmann RS20 User Manual page 51

Ring/Network Coupling
 Select the control port
With "Control port" you specify at which port you are connecting the
control line.
You will find the port assignment for the redundant coupling in
table 10.
Device Coupling port
RS2-./. Port 1
RS2-16M Adjustable for all ports
(default setting: port 1)
RS20, RS30, Adjustable for all ports
RS40 (default setting: port 1.4)
OCTOPUS Adjustable for all ports
(default setting: port 1.4)
MICE Adjustable for all ports
(default setting: port 1.4)
PowerMICE Adjustable for all ports
(default setting: port 1.4)
MS20 Adjustable for all ports
(default setting: port 1.4)
MS30 Adjustable for all ports
(default setting: port 2.4)
RSR20/RSR30 Adjustable for all ports
(default setting: port 1.4)
MACH 100 Adjustable for all ports
(default setting: port 2.4)
MACH 1000 Adjustable for all ports
(default setting: port 1.4)
MACH 3000 Adjustable for all ports
MACH 4000 Adjustable for all ports
(default setting: port 1.4)
Table 10: Port assignment for the redundant coupling (two-Switch coupling
with control line)
Note: Configure the coupling port and the redundancy ring ports on different
ports.
UM Redundancy Configuration L2E
Release 7.1 12/2011
4.2 Preparing a Ring/Network
(see fig. 23)
Control port
Stand-by port (can only be combined
with RS2-../.. )
Adjustable for all ports
(default setting: port 2)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 2.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 2.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
Adjustable for all ports
(default setting: port 1.3)
Coupling
51