Setting The Display Brightness - Gaggenau RW 404 Operating And Installation Instructions

5. Press the on/off button to exit the setting mode.
The current temperatures appear on the display in
the new temperature unit.

Setting the display brightness

Information:
During start up, the set display brightness only becomes
effective when the set interior temperatures are reached.
1. Press the fan button for approx. 5 seconds.
On the display, "MENU" appears for the setting
mode; "S" (Sabbath mode) also blinks.
2. Press the right plus button until "h" appears on the
display for the brightness setting.
18
5 s
3.
3. Press the fan button to confirm.
The current value of the brightness appears on the
display: "h0" for lighting off to "h5" for maximum
brightness.
4. Press the right plus or minus button until the desired
value for the brightness appears on the display.
5. Press the fan button to confirm the changed value.
"h" blinks on the display.
6. Press the on/off button to exit the setting mode.
After approx. 1 minute, the display brightness is changed
to the set value.
4.