Gaggenau RW 404 Operating And Installation Instructions page 9

Changing the door stop
The door stop can only be changed when the appliance
is not installed and should only be changed by a trained
technician.
2 people are required for this work.
1.
1. Remove the top and bottom hinge covers.
2. While the second person is holding the door, unscrew
and remove the top and bottom hinge screws and
the door.
1. 2.
2.
4.
3. Unscrew the screw and remove the locking bolt from
the door.
4. Press together the covers at the points indicated
(narrow arrows), unsnap, and remove.
5. Unscrew the hinges and screw them back on on the
side diagonally across from where they were.
3.
9