Gaggenau RW 404 Operating And Installation Instructions page 12

Installing the appliance
1. Remove the protective film from the cover strips and
affix cover strips left and right on the front edge of the
appliance.
2. Adjust all 4 adjustable feet with the included key so
that the appliance stands level and the appliance is
3
4 mm ( / '') from the upper edge of the installation
16
niche.
Turn the key in the clockwise direction to lift the
appliance. Turn in the counter clockwise direction
to lower the appliance.
NOTICE
Risk of damage!
If the appliance is crooked, the appliance body can
deform and the door will not close properly.
Align the appliance horizontally and vertically.
12
3. Push appliance into the installation niche until the
door of the appliance is flush with the furniture fronts.
While so doing, make sure that the power cable is not
damaged.
4. Insert the foam part approx. 10 mm (
opening in the appliance base shown in the picture.
Important: If the foam part is not inserted, the
appliance will not achieve its full cooling output.
5. Open the door.
6
/ '') into the
16