Adjusting The Temperature; Setting The Display Brightness - Gaggenau RW 404 Operating And Installation Instructions

Adjusting the temperature

The temperatures in the two compartments can be set
independently of one another within a range of +5 °C to
+20 °C.
1. Press the + or - button for the compartment that you
want to set the temperature of.
The temperature display for the compartment con
cerned starts flashing.
2. Press the + or button repeatedly until the desired
temperature is displayed.
+ button: increases the temperature (warmer)
- button: lowers the temperature (cooler)
Each press of the button alters the temperature
setting by 1 degree.
Approximately 5 seconds after the last press of the
button, the electronic control module stores the set
temperature.
The display then reverts to showing the actual
temperature.

Setting the display brightness

Note:
When the appliance is first switched on, the set display
brightness does not come into effect until the set inside
temperatures have been reached.
1. Press and hold the Fan button for approx. 5 seconds.
The display then shows MENU" to indicate Setting
mode together with a flashing c" for child lock.
2. Press the right hand Plus button.
The display shows a flashing h" for the brightness
setting.
3.
3. Press the Fan button to confirm.
The display then shows the current setting for the
brightness: the possible range extends from h0" for
lighting off to h5" for maximum brightness.
4. Press the right hand Plus or Minus button repeatedly
until the desired brightness setting is indicated.
5 s
4.
39