Subscribe to Our Youtube Channel
Related Manuals for Extraflame LUCIA PLUS
Summary of Contents for Extraflame LUCIA PLUS
- Page 1 PeLLet StoveS USeR MANUAL LUCIA PLUS MADE ITALY design & production 004277561 - Rev 000...
- Page 2 ENGLISH...
-
Page 3: Table Of Contents
INStaLLatIoN ........................................8 MINIMUM DISTANCES .............................................. 8 PREPARATIONS FOR MAINTENANCE ........................................8 DEtaILS of LucIa pLuS ....................................10 aIr DuctING fEaturES ....................................11 FACTORy DEFAUlT OPERATION IN AIR DUCTINg MODE .................................11 OPERATION IN AIR DUCTINg wITh ThERMOSTAT OR PRObE (OPTIONAl)........................11 ta aDDItIoNaL tHErMoStat (optIoNaL) ............................... - Page 4 ATENÇÃO - OBrIgATÓrIO ATTENZIONE TASSATIVO ANTES dE mOVImENTAr A SAlAmANdrA, rE- PrImA dI mOVImENTArE lA STufA TOglIErE lE TIrAr AS cErâmIcAS INdIcAdAS PArA EVITAr mAIOlIchE INdIcATE PEr EVITArE dANNI. dANOS. ATTENTION - cOmPulSOrY TÄhElEPANu! BEfOrE mOVINg ThE STOVE, kINdlY TAkE ThE ENNE Ahju lIIguTAmIST EEmAldAgE SEllElT cErAmIcS Off IN OrdEr TO NÄIdATud kErAAmIlISEd OSAd, ET VÄlTIdA...
-
Page 5: English
We thank you for having chosen our company; our product is a great heating solution developed from the most advanced technology with top quality machining and modern design, aimed at making you enjoy the fantastic sensation that the heat of a flame gives, in complete safety. Warnings This instructions manual is an integral part of the product: make sure that it always accompanies the appliance, even if transferred to another owner... - Page 6 Š THE GENERATOR MUST NOT BE USED BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY AND MENTAL CAPACITIES OR WHO ARE UNSKILLED PERSONS, UNLESS THEY ARE SUPERVISED AND TRAINED REGARDING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY. Š...
-
Page 7: Routine Maintenance
THAT SWITCH THE GENERATOR OFF. IF THIS OCCURS, CONTACT THE TECHNICAL AFTER-SALES SERVICE AND ALWAYS DISABLE THE SAFETY SYSTEMS. Š IN THE EVENT THE FLUE CATCHES FIRE, USE SUITABLE SYSTEMS FOR SUFFOCATING THE FLAMES OR REQUEST HELP FROM THE FIRE BRIGADE. -
Page 8: Installation
InstallatIOn general The flue gas exhaust and hydraulic connections must be carried out by qualified personnel who must issue installation conformity documentation compliant with national standards. The installer must provide the owner or person acting for him, according to the legislation in force, with the declaration of conformity, supplied with: 1) the use and maintenance manual of the appliance and of the system components (such as for example, the smoke ducts, chimney, etc.);... - Page 9 In the presence of type B gas appliances with intermittent operation not intended for heating, they must have their own aeration and/or ventilation opening. The air inlets must meet the following requirements: Š they must be protected with grids, metal mesh, etc., but without reducing the net useful section; Š...
-
Page 10: Details Of Lucia Plus
DEtAILs oF LUCIA pLUs Ambient air outlet Combustion air inlet Air Ducting Z2 inlets Access to combustion chamber Air ducting Z2 outlet Air ducting Z1 inlets and ash drawer Touch screen display Air ducting Z1 outlet TA additional thermostat input... -
Page 11: Air Ducting Features
air ducting features The stove has 2 independent outlets for air ducting. Air ducting 1 - 2 are enabled by factory default. Features: Š diameter of air ducting outlet: 2x80 mm Š maximum recommended air ducting length 8 m Š temperature controlled air ducting Š... -
Page 12: Ta Additional Thermostat (Optional)
oPerAtioN iN Air DUCtiNG with NtC Probe 10KΩ (oPtioNAl) SET configured to OFF The air ducting motor will remain off unless the fumes temperature exceeds the Set the desired temperature ( from 7 to 37 °C) normal operating temperatures Once the specific activation threshold has been reached and exceeded, at temperature SET configured to AUTO to be satisfied the air ducting motor will follow the stove settings. -
Page 13: Stove Positioning
stove positioning To ensure the stove works correctly, it should always be positioned so that it is perfectly level, using a spirit level. note for correct operation Pellet hopper lid The following indications must be respected for correct pellet stove operation: During stove operation, both the pellet hopper lid and the door must always be closed. -
Page 14: Pellets And Loading
Pellets and loading Pellets are made by subjecting wood shavings i.e. the rejects of pure unpainted wood from sawmills, carpentry products and products from other activities connected to wood working and transformation, to very high pressures. This type of fuel is fully ecological as no glues are used for its compaction. In fact, pellet compactness is guaranteed over time by a natural substance found in wood: lignite. -
Page 15: Remote Control
Remote contRol The remote control can be used to adjust the main stove functions. Transmitter Select air mode Display Lock keyboard On/off stove (hold for 3 seconds) Degrees Celsius / Fahrenheit Set power Press the button once to enable or disable the chrono Set switch-off delay: The button allows to set the switch- off delay. -
Page 16: Remote Control Icons
Remote contRol Icons Air mode selected: Enable chrono Flashing COMFORT Light on = activated On AUTO Light off = deactivated Indicates the transmission of the radio signal Set switch-off delay On = during all radio communication Off = radio communication absent Battery low Keys locked Set power level. -
Page 17: Touch Screen Display
TOUCH SCREEN DISPLAY The stove is equipped with a modern touch screen display with Wi-Fi technology that allows for the individual functions of the unit to be adjusted by the user in an easy and intuitive manner. Touch the buttons (icons) on the display to activate the actions. The touch screen display reacts with the touch of your fingers. CAUTION! Š... -
Page 18: Control Board
CONTROL BOARD vieWing oF vArious TexT messAges on/off stove. increase operating power / scroll through the menus. Decrease operating power / scroll through the menus. increase operating set thermostat / scroll through the menus. Decrease operating set thermostat / scroll through the menus. To access the menu / confirm key. -
Page 19: General Menu
gENERAL mENU go back - exit scroll parameters: next (3); previous (2) modify data settings: increase (4); decrease (5) confirm - access menu FRONT AIR AIR DUCTINg 1 TEMPERATURE AIR DUCTINg 2 TEMPERATURE EASY SETUP CHRONO ENABLINg PRg1 PRg2 SETTINgS DATE-TIME PRg3 LANgUAgE... -
Page 20: First Ignition Settings
fIRST IgNITION SETTINgS Once the power cord at the back of the stove has been connected, move the switch, also located on the back, to (I). The switch at the back of the stove powers the stove board. The stove remains off and a first screen appears on the panel reading OFF . mAINS POwER fREqUENCY 50/ 60Hz if the stove is installed in a country with a frequency of 60hz, the display will show "poWer FreQ. -
Page 21: Operation And Logic
OPERATION AND LOgIC IgNITION once the previously listed points have been checked, press key 1 for three seconds to ignite the stove. During ignition, the stove will check for a flame for a period of 15 minutes. When the right temperature is reached, the stove will switch from ignition to prepArATion. PREPARATION During the preparation phase, the stove stabilises combustion, increasing it progressively, to then start ventilation and switch to WorK wORk... -
Page 22: Front Air
fRONT AIR This menu allows the front ventilation motor speed to be set. range: (COMFORT, AUTO). if comfort mode is selected, the front air speed is reduced. To guarantee efficient combustion, front air is excluded when the appliance is running at minimum power. conTroLs proceDure Š... -
Page 23: Easy Setup
EASY SETUP The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change without altering pellet quality. By using the eAsY seTup function, it is possible to change the calibration of the volumetric weight by increasing or decreasing the preset values. -
Page 24: Chrono
CHRONO This function allows stove ignition and switch-off to be automatically programmed. The factory setting for CHRONO is off. The chrono allows the programming of 4 time slots per day, which can be used every day of the week. for each time slot, it is possible to set ignition and switch-off times, specific days of application, desired temperature and set power. Current day and time settings are essential for the correct operation of the Chrono. - Page 25 EXAMPLE OF CHRONO OVERLAPPINg TIMES/SLOTS TIME SLOT 02:00 08:00 16:30 23:00 SET POWER 02:00 08:00 16:30 23:00 SET THERMOSTAT 22° 18° 02:00 08:00 16:30 23:00 start 02:00 Time slot 1 power 3 - seT ThermosTAT 22°c stop 23:00 start 08:00 Time slot 2 power 1 - seT ThermosTAT 18°c stop 16:30...
-
Page 26: Settings
SETTINgS • DATE-TImE • LANgUAgE See chapter: firSt ignition SettingS • DEgREES UPDATE This menu allows you to adjust the brightness of the display. The values range from oFF, 1 to 20. if set to oFF, the display backlighting is set to maximum brightness and turns off after a 60 second delay. -
Page 27: Additional Thermostat
ADDITIONAL THERmOSTAT N.B. : INSTALLATION mUST BE PERfORmED BY AN AUTHORISED TECHNICIAN it is possible to control the temperature of a room adjacent to the room where the stove is positioned (it is advisable to place the optional mechanical thermostat at a height off the ground equal to 1.50 m). stove operation with the external thermostat connected in the TA clamp may differ depending on whether or not the sTAnD-BY function is enabled. -
Page 28: Reset
RESET Allows the user to reset all editable values to the default values. conTroLs proceDure Š press key 6. Š press key 3 until SETTINgS appears and confirm by pressing key 6. Š press key 3 until RESET appears and confirm by pressing key 6. Š... -
Page 29: Cleaning And Maintenance
TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR VISIT THE WEBSITE: WWW.LANORDICA-EXTRAFLAME.COM Cleaning and maintenanCe always follow the instruCtions in Complete safety! Š Make sure that the power cord is unplugged because the generator may have been programmed to switch on. - Page 30 burn pot and Combustion Combustion Chamber: Š Vacuum the residue in the burn pot Š Remove the burn pot completely from the relevant compartment; Š Vacuum the ash from the burn pot slot, ignition plug pipe holder and combustion chamber. Š...
-
Page 31: Routine Maintenance Performed By Qualified Technicians
BURN POT HOLES TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR VISIT THE WEBSITE: WWW.LANORDICA-EXTRAFLAME.COM routine maintenanCe performed by Qualified teChniCians routine maintenance must be performed at least once a year. Given the generator uses pellets as solid fuel, it requires annual routine maintenance, which must be performed by a Qualified technician, using only original spare parts. - Page 32 TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR VISIT THE WEBSITE: WWW.LANORDICA-EXTRAFLAME.COM THE IMAGES ARE FOR ILLUSTRATIVE PURPOSES. Fumes motor (dismantling and cleaning, flue pipe and "T” fitting), new seal where required Gaskets, pellet hopper, inspections, ash drawer and door (replace and apply silicone where indicated) Combustion chamber and heat exchanger (full cleaning) including ignition plug pipe Hopper (complete emptying and cleaning) and check gasket.
- Page 33 TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR VISIT THE WEBSITE: WWW.LANORDICA-EXTRAFLAME.COM THE IMAGES ARE FOR ILLUSTRATIVE PURPOSES. Fumes motor (dismantling and cleaning, flue pipe and "T” fitting), new seal where required Gaskets, pellet hopper, inspections, ash drawer and door (replace and apply silicone where indicated) Combustion chamber and heat exchanger (full cleaning) including ignition plug pipe Hopper (complete emptying and cleaning) and check gasket.
-
Page 34: Displays
Displays Display Reason Generator off sTaRT The START phase is in progress pelleT loaDinG Continuous pellet loading is in progress during the ignition phase The ignition phase is in progress pRepaRaTion The preparation phase is in progress WoRk The normal work phase is in progress MoDulaTion The generator is operating at the minimum speed final cleaninG... -
Page 35: Guarantee Terms
Extraflame S.p.A. cannot be held liable for injury or damage which may - either directly or indirectly - be caused to persons, animals and property ensuing from failure to observe all the instructions provided in the relevant instruction manual and the warnings regarding installation, use and maintenance of the product, that can also be downloaded on the website. - Page 36 AddITIONAL wARNINGs Š Only use the fuel recommended by the manufacturer. The product must not be used as an incinerator. Š Do not use the product as a ladder or supporting structure. Š Do not place laundry on the product to dry it. Any clothes-horse or similar objects must be kept at due distance from the product. Danger of fire or damage to the coating.
-
Page 37: Disposal
Disposal InformatIon for management of electrIc and electronIc applIance waste contaInIng batterIes or accumulators This symbol, which is used on the product, batteries, accumulators or on the packaging or documents, means that at the end of its useful life, this product, the batteries and the accumulators included must not be collected, recycled or disposed of together with domestic waste. Improper management of electric or electronic waste or batteries or accumulators can lead to the leakage of hazardous substances contained in the product. - Page 38 ENGLISH...
- Page 39 ENGLISH...
- Page 40 Extraflame S.p.A. Via Dell’Artigianato, 12 36030 - MONTECCHIO PRECALCINO (VI) - ITALY +39.0445.865911 - +39.0445.865912 - info@extraflame.it - www.lanordica-extraflame.com MADE ITALY design & production TO FIND THE SERVICE CENTRE NEAREST TO YOU CONTACT YOUR DEALER OR CONSULT THE SITE WWW.LANORDICA-EXTRAFLAME.COM...
Need help?
Do you have a question about the LUCIA PLUS and is the answer not in the manual?
Questions and answers