Rinsing The Coffee Circuit; Setting The Grinder - Krups EA 80 Series Use And Maintenance

3.4 Rinsing the coffee circuit

After several days without being used,
you need to rinse the coffee circuit. You
may rinse after switching on the ap-
pliance or at any time by pressing the
☞ Press the ON/OFF button (1).
The ON/OFF indicator light flashes: the
appliance is preheating.
The ON/OFF indicator light remains lit:
the appliance is ready to use.
☞ Place a sufficiently large recipient under
the coffee tubes then press the "Service"
button (8).
The rinsing procedure starts and stops au-
tomatically, after around 40 ml have pas-
sed through.

3.5 Setting the grinder

You can set the grinding fineness of the
grinder. The finer the grinder setting for
the coffee, the stronger the aroma of the
coffee will be, and the coffee will also be
creamier.
Caution:
Only turn the knob (13)
!
during grinding so as to avoid damaging
the grinder.
Meaning of the setting knob positions
Fine grind
Medium grind
Coarse grind
Use and maintenance / SERIE EA 80xx
KRUPS Espresseria Automatic
"Service" button.
Do not force the grinder setting
knob!
Set the grinding fineness for the next
drink preparation, while the coffee beans
are being ground.
17