Krups EA 80 Series Use And Maintenance page 64

KRUPS Espresseria Automatic
Once the descaling cycle has finished, the "calc" (6) and "water tank" (9) indicator lights
will start flashing again.
☞ Empty the recipient and put it back under the coffee tubes and steam nozzle. Empty the
drip tray. Empty and clean the water tank then fill it up to the "max" line.
Fit the drip tray and the water tank.
☞
The "calc" indicator light (6) flashes
and the "water tank" indicator light
(9) is extinguished.
Press the Service button (8).
☞
The "calc" indicator light (6) remains lit..
Once the first rinsing cycle is finished, the
"clean" indicator light will flash again.
☞ Empty the recipient and the drip tray and
fit them onto the appliance again.
☞ Press the "Service" button.
The "clean" indicator light will remain lit.
The "calc" indicator light will be extingui-
shed.
☞ Remove the recipient and empty it.
☞ Empty the drip tray and fill the water tank.
Caution : If the descaling pro-
!
gramme is interrupted by a power cut or
accidental unplugging of the machine, it
must be started again from the begin-
ning. A new descaling sachet will be re-
quired in this case. The programme must
28 Use and maintenance / SERIE EA 80xx
i
Info : The first rinsing cycle starts and runs
automatically. It allows the rest of the
descaling product to be eliminated
from inside the appliance. Duration:
approximately 6 minutes.
i
Info : The second rinsing cycle starts and
runs automatically. It allows the rest
of the descaling product to be elimi-
nated from inside the appliance. Du-
ration: approximately 6 minutes.
be started again completely in order to
rinse the water circuit and eliminate any
traces of harmful descaling products