Krups EA 80 Series Use And Maintenance page 55

4.2 Preparation of an espresso or a coffee
You can set the quantity of water
required for an espresso between 20 and
70 ml, for a coffee between 80 and 120
ml.
Preparation of an espresso or a coffee
☞ Place a cup underneath the coffee tube
(24). You can raise or lower the coffee
tube to suit the cup.
☞ Select the quantity of the drink using the
knob (3):
For an espresso: 20 to 70 ml
For a coffee: 80 to 220 ml
☞ Press the button of the drink chosen:
- The "Standard" button (4) for a normal
espresso or coffee.
- The "strong" button (5) for a strong es-
presso or coffee.
The grinding and heating phases start.
☞ Check the volume of water chosen and
modify if required using the knob (3).
Once the heating cycle is complete, the
machine starts the percolation.
☞ Wait until the drink has been completely
dispensed before removing the cup.
Caution : DO NOT REMOVE THE HOLDER BEFORE THE END OF THE CYCLE (i.e. 15
seconds after the coffee has started to be dispensed).
Use and maintenance / SERIE EA 80xx
KRUPS Espresseria Automatic
Apart from normal strength for these two
drinks, you can also choose the "strong
coffee" and "strong espresso" option.
"Standard"
! Note : To stop the drink being dispensed,
because the cup is full or any other reason,
press the "standard" or "strong" button of your
choice. You may reduce the volume of water
during dispensing by turning the knob. If you
want to stop dispensing, turn the knob to the
min. position.
"Strong"
19