Rinsing The Coffee Circuit - Krups EA 82 Series Use And Maintenance

3.4 Rinsing the coffee circuit

After several days without being used,
you need to rinse the coffee circuit.
Once the appliance has been switched
on, you can rinse at any time via the
Press the ON/OFF button (1).
A welcome message is displayed on the
screen, then another warning that the ap-
pliance is preheating. A few seconds later,
a question will appear on the screen as-
king if the appliance needs to be rinsed or
not.
Place a sufficiently large recipient under
the coffee tubes, then select "Yes" with
the knob and confirm by pressing OK.
The rinsing procedure starts and stops au-
tomatically, after around 40 ml have pas-
sed through.
The drink selection menu is then displayed on the screen.
KRUPS Espresseria Automatic Premium
Use and maintenance / SERIE EA 82xx
menu "Servicing" using the PROG key
and by selecting "Rinsing".
15