Text Box - Cisco MX200G2 Manual

Text box

Table of contents
Introduction
21°C
Create a user interface
Example of use: Help text, instructions, explanation of what different
presets mean, or informative text from the control system, such as
"The projector is warming up".
API for in-room control
The text box with larger font size is primarily meant for status values,
such as the current temperature in the room.
Widgets Widgets
Events
Command reference
None
Troubleshooting
Tips and tricks
Commands
Use the
Examples
In-Room Control on Touch 10
for Cisco TelePresence
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
Collaboration Endpoint
software version CE8.2
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
Aa
command to set the text in the text box.
SetValue
Text boxes come in different sizes. They have up to two lines of text
and the text automatically wraps to the new line.
A small text box with larger font size and no line wrap is also
available.
Aa
You can define the initial text for the text box in the editor, and later
on use the
Example:
"textbox": "The projector is warming up.".
xCommand UserInterface Extensions Widget SetValue
27
command to enter text dynamically.
SetValue
Set the following text in the text box with WidgetId =
WidgetId: "textbox" Value: "The projector is warming up."