Statuses - Cisco MX200G2 Manual

Commands
Table of contents
UserInterface Extensions Widget SetValue
Introduction
This command sets the value of the given widget, and the
UserInterface Extensions statuses are updated accordingly. If the
Create a user interface
value is out of range, the command returns an error.
USAGE:
API for in-room control
xCommand UserInterface Extensions Widget SetValue Value:
where
Widgets
Command reference Command reference
Troubleshooting
UserInterface Extensions Widget UnsetValue
Tips and tricks
This command empties the value of the given widget, and the
UserInterface Extensions statuses are updated accordingly. The user
interface is notified that the widget is no longer selected.
Examples
USAGE:
xCommand UserInterface Extensions Widget UnsetValue
where
In-Room Control on Touch 10
for Cisco TelePresence
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
Collaboration Endpoint
software version CE8.2
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
WidgetId: WidgetId
: String (0, 255)
Value
The value of the widget. The range of values depends on the
widget type.
: String (0, 40)
WidgetId
The unique identifier for the widget.
WidgetId: WidgetId
: String (0, 40)
WidgetId
The unique identifier for the widget.
UserInterface Extensions Clear
This command deletes all user interface extensions (widgets) from
the video system.
USAGE:
xCommand UserInterface Extensions Clear
Value
UserInterface Extensions List
Use this command to list all user interface extensions (widgets) that
exist on the video system.
USAGE:
xCommand UserInterface Extensions List
32