General Installation Information; Product Label - Fisher & Paykel OR90 Series Installation Manual

Dual fuel freestanding cooker
Hide thumbs Also See for OR90 Series:
Table of Contents

Advertisement

Cleaning and servicing
Service should only be performed by an authorised technician.
When removing appliance for cleaning and/or service:
Shut off gas at main supply.
Disconnect AC power supply.
Disconnect gas line to the inlet pipe.
Carefully remove the cooker by pulling outward.
CAUTION: Cooker is heavy; use care in handling.
The misuse of oven door (eg stepping, sitting, or leaning on them) can result
in potential hazards and/or injuries.
When installing or removing the cooker for service, a rolling lift jack should be used.
Do not push against any of the edges of the cooker in an attempt to slide it into or
out of the installation. Pushing or pulling a cooker (rather than using a lift jack) also
increases the possibility of bending the leg spindles or the internal coupling connectors.
IMPORTANT!
Cooker is heavy, use care in handling.
Do not lift the cooker by the oven door handle or hob rail, or by lifting the cooktop trim
as this may damage the appliance.
4
2

GENERAL INSTALLATION INFORMATION

Replacement parts
Only authorised replacement parts may be used in performing service on the cooker.
Replacement parts are available from factory authorised parts distributors.
Contact the nearest parts distributor in your area.

PRODUCT LABEL

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Or90scg4Or90sdg4Or90scg6Or90sdg6

Table of Contents