Final Checklist; Gas Supply; Operation - Fisher & Paykel OR90 Series Installation Manual

TO BE COMPLETED BY THE INSTALLER
GENERAL
Placement of unit.
Specified clearance maintained to cabinet surfaces.
Unit Level – front to back, side to side.
All packaging material and tie straps removed.
Island trim or optional backguard correctly attached.
The anti-tip bracket is correctly installed.
ELECTRICAL
Adequate ground connection.

GAS SUPPLY

Site gas supply is compatible with cooker model, and sufficient pressure is available
(see section 'Gas connection').
The pressure regulator (Natural Gas) or the test point adapter (ULPG) are connected
and correctly set for the type of gas.
Unit tested and free of gas leaks.
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer's Name
Installer's Signature
Installation Company
Installation Date
@2

FINAL CHECKLIST

OPERATION

All internal packing materials removed. Check below the cooktop grates and inside
the oven.
If converted for use with ULPG, confirm that the test point adapter and cooktop
burner injectors have been correctly set for use with ULPG.
Dials turn correctly and freely.
Each burner lights satisfactorily, both individually and with other burners operating
at the same time.
The oven display is functioning correctly and the oven is heating when turned on.
Oven door hinges seated and door opens and closes properly.
Cooktop grates are correctly positioned, level, and do not rock.
Cooktop burner flame correct.
21