Functions; Overview Functions - MDT AKS-0410.01 Manual

Technical Manual Switch Actuators AKI/AKS/AKK

2.4 Functions

All of the channels have identical functions (have a look at the functional overview). The numbers of
channels depends to the hardware design, which can have 2, 4, 8, 12 or 16 channels. The
identification is standardly in consecutive alphabetic order.
There are 3 different states for every channel possible:

The channel has no function. So there are no communication objects for this channel shown.

If the channel is chosen as switch, there will be different parameterization options for
configuring the switching process.

Now, the channel can become a staircase light function. This function causes an automatic
switch off of the channel after an adjusted time.
2.4.1 Overview functions
Group of functions
Group addresses
Reset behavior
Relay mode
Switch functions
Time functions
Staircase light functions
Superordinate functions
Scenes
Status functions
Chart 1: Overview functional possibilities
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
7
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
not active
Switch
Staircase
Functions
number of objects/connections=
dynamic (freely assignable of the user)
behavior at bus power breakdown
behavior at bus power up
startup timeout
normally closed/ normally opened
switching
central switching function
on‐delay
off‐delay
time for staircase
pre‐warning (with adjustable warning and
pre‐warning time)
manual off
retriggerable on/off
blocking function
logic functions (AND/ OR)
scene function for up to 8 scenes per channel
feedback function