Central Communication Object; Default Settings Of The Communication Objects - MDT AKS-0410.01 Manual

Technical Manual Switch Actuators AKI/AKS/AKK
The following communication objects can be shown for a channel selected as staircase:
Nr. Function
1 Staircase
2 Block
5 Status
+8 next channel
Chart 3: Communication objects "staircase"
3.2 Central communication object
The central function is always shown also if it is not used in any of the channels. The communication
object for the central function is at the bottom of the communication objects. It has always the first
number after the communication objects for the channels. So at an 8‐fold switch actuator, it has the
number 64.
The communication object of the central function calls all channels, which have an activated central
function.
The following communication object exists only once and is for channels:
Nr. Function
Central function
Chart 4: Central communication object
3.3 Default settings of the communication objects
The following chart shows the default settings of the communication objects:
Nr. Name
0 Channel A
1 Channel A
2 Channel A
4 Channel A
5 Channel A
6 Channel A
7 Channel A
+8 next channel
96 Central function
128
Chart 5: Communication objects – default settings
You can see the default values for the communication objects from the upper chart. According to
requirements the priority of the particular communication objects as well as the flags can be
adjusted by the user. The flags allocates the function of the objects in the programming thereby
stands C for communication, R for Read, W for write, T for transmit and U for update.
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
10
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Usage
switches the staircase function on/off
blocks the channel
feedback function
Usage
number accords to the hardware design
Default settings
Object Function
switch on/off
Staircase
Block
Scene
Status
Logic 1
Logic 2
switch on/off
Data type
DPT 1.001 In, Write
DPT 1.001 In, Write
DPT 1.001 Out, Read
Data type
DPT 1.001 In, Write
Length Priority
1 Bit Low
Low
1 Bit
Low
1 Bit
Low
1 Byte
Low
1 Bit
Low
1 Bit
Low
1 Bit
1 Bit Low
C R W T U
X X
X X
X X
X X
X X X
X X
X X
X X