Staircase Time - MDT AKS-0410.01 Manual

Technical Manual Switch Actuators AKI/AKS/AKK
4.5.2 Staircase time
The following illustration shows the setting options at the ETS‐Software:
Illustration 19: Staircase time
The staircase function is activated by choosing a channel as staircase. This function enables an
automatic turn off of the channel after an adjusted time, called "time for staircase". The time for
staircase can be parameterized freely. By sending an "on‐signal" at the communication object, the
channel is switched on and the time runs out. After the time is ran out, the channel is switched off
automatically. There are a lot of further functions to adjust the staircase function. These functions
are described at the following segments.
The following chart shows the relevant communication object:
Number Name
1 Staircase
Chart 21: Communication object staircase
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
28
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Length Usage
1 Bit Calling of the staircase function