Channel Selection - MDT AKS-0410.01 Manual

Technical Manual Switch Actuators AKI/AKS/AKK
4.2 Channel selection
The following illustration shows the menu for selecting the channels:
Illustration 7: Channel selection
There are 3 possible states for every channel, which can be adjusted at the menu "channel
preselection". The following parameterization accords to the chosen state of a channel. But if you
chosse a channel as "not active", there will be no further parameterization options available.
The chart shows the setting options for everey channel:
ETS‐text
Channel A‐[O]
Chart 7: Channel selection
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
12
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Dynamic range
[default value]

not active

Switch

Staircase
comment
Operating mode of the
channels