Intended Use - Siemens MOTOX BA 2510 Operating Instructions Manual

America
Telephone: +1 800 333 7421
support.america.automation@siemens.com
Asia / Australia / Pacific
Telephone: +86 400 810 4288
support.asia.automation@siemens.com
Valid operating instructions for MOTOX
● BA 2010 - operating instructions for MOTOX gearboxes
● BA 2011 - operating instructions for MOTOX worm gearbox SC
● BA 2012 - operating instructions for MOTOX worm gearbox S
● BA 2019 - operating instructions for MOTOX input units
● BA 2310 - operating instructions for three-phase and single-phase AC motors and
motors equipped with brake with accessories
● BA 2320 - operating instructions for LA/LG and LAI/LGI motors
● BA 2510 - operating instructions for MOTOX optional add-on units
● BA 2515 - operating instructions for MOTOX gearboxes for overhead conveyors
1.2 Copyright
The copyright to these operating instructions is held by Siemens AG.
These operating instructions must not be wholly or partly reproduced for competitive purposes, used in any unauthorized
way or made available to third parties without agreement of Siemens AG.
1.3

Intended use

ATEX version gearboxes
The ATEX gearbox satisfies the requirements of the Explosion Protection Directive 2014/34/EU.
In the case of ATEX version gearboxes, please observe instructions marked with this symbol.
The MOTOX gearboxes described in these operating instructions have been designed for stationary use in general
engineering applications.
Unless otherwise agreed, the gearboxes have been designed for use in machinery and plants in industrial environments.
The gearboxes have been built using state-of-the-art technology and are shipped in an operationally reliable condition.
Changes made by users could affect this operational reliability and are forbidden.
Note
The performance data assumes an ambient temperature of -20° C to +40° C and an installation altitude of up to 5000 m
above sea level.
In the case of other ambient temperatures and installation altitudes, please contact Technical Support.
The gearboxes are designed only for the area of application described in Chapter Technical data in the operating
instructions BA 2010 or BA 2515 for MOTOX gearboxes
Do not operate the gearboxes outside the specified performance limits.
Any different operating conditions require new contractual agreements.
Do not climb on the gearbox. Do not place any objects on the gearbox.
1.4 Obligations of the user
The operator must ensure that all persons assigned to work on the geared motor have read and understood these operating
instructions and that they follow them in all points in order to:
● Eliminate the risk to life and limb of users and other persons.
● Ensure the operational safety of the geared motor.
BA 2510
A5E38121849A/RS-AB, 10/2016
3