Siemens MOTOX BA 2510 Operating Instructions Manual page 19

9 Gearbox cooling
9.1 Heat exchanger unit
9.1.1 Design and mode of operation
MOTOX helical gearboxes, parallel shaft gearboxes and bevel gearboxes can be equipped with a heat exchanger unit to
reduce the temperature of the gearbox oil. The coolant that flows through the heat exchanger unit dissipates the heat.
The heat exchanger unit is mounted on the gearbox cover. The piping for feeding and extracting the coolant is connected to
the cover. There is no preferred direction of flow.
①
Cast iron end cap
②
Brass end plate
③
Aluminum cooling fins
④
Copper pipes
Figure 9-1 Heat exchanger unit
9.1.2 Technical data
Figure 9-2 Heat exchanger unit dimensions
BA 2510
A5E38121849A/RS-AB, 10/2016
17