Table of Contents
Advertisement
Explanation of symbols in type of construction diagrams:
Ventilation
Figure 4-1
Extruder flange for types of construction H-01, H-02, H-03, H-04 for KAE and FDAE/FZAE sizes 68 - 168
4.3
Oil quantities
NOTICE
Incorrect oil quantities damage the gearbox
The oil quantities in liters listed in the table are guide values for changing the oil. They are used, for example, for lubricant
storage and procurement.
The precise oil quantities are stated on the gearbox or geared motor rating plate.
Check the oil level before commissioning.
Table 4-1
Oil quantities for extruder flange
Types of construction
H-01, H-02, H-03, H-04
5
Helical gearbox with slide ring seal DU/ZU
5.1
Technical description
The helical gearbox with slide ring seal is delivered ready for operation with the appropriate lubricant.
It is equipped with screw plugs and is used in a closed state.
CAUTION
If other sealing elements are used, moisture will enter the gearbox
Do not exchange the screw plugs for other types of sealing element.
CAUTION
Dry running will destroy the seal
In every operating condition, the slide ring seal must be completely flushed with fluid.
10
Oil level
Size
68
88
0.5
0.8
108
128
1.1
1.7
Oil drain
148
168
2.5
3.6
BA 2510
A5E38121849A/RS-AB, 10/2016
Advertisement
Table of Contents
