Check For Leaks - Paramount Fitness KLD7002S Instruction Manual

Hide thumbs Also See for KLD7002S:
Table of Contents

Advertisement

Check for Leaks

Your patio heater has been checked at all factory connections for leaks, but
you should always check when you attach the LPG cylinder. To check for
leaks, following these instructions:
--Assemble all gas connections;
--Connect regulator assembly to the propane tank;
--Make sure the heater valve is turned OFF.
1) Make soapy solution by mixing 1 part liquid dish soap and 3 parts water.
2) Open the propane tank valve.
3) Spray of the soapy solution onto the
gas hose /regulator and regul ator/cylinder connection.
4) Inspect the connections and look for bubbles.
5) If no bubbles appear the connection is safe.
6) If bubbles appear, there is leakage. Close the propane tank valve, and
loosen and re-tighten this connection.
7) Check for leakage again.
- 11 -
ASSEMBLY

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KLD7002S and is the answer not in the manual?

This manual is also suitable for:

Kld7002ss

Table of Contents

Save PDF