Dalsa Piranha4 User Manual page 53

Piranha4 2K and 4K Dual Line Monochrome CMOS Camera
Display Name
UserSet4
UserSet5
UserSet6
UserSet7
UserSet8
Pow er-on User Set
Current User Set
Load Configuration
Save Configuration
Device Built-In Self
Test Status
LED Color
Temperature
Refresh
Temperature
Input Voltage
Refresh Voltage
Teledyne DALSA
Feature
UserSet4
UserSet5
UserSet6
UserSet7
UserSet8
UserSetDefaultSelector
UserSetSelector
UserSetLoad
UserSetSave
deviceBISTStatus
deviceLEDColorControl
DeviceTemperature
refreshTemperature
deviceInputVoltage
refreshVoltage
Description
Select the User-defined Configuration space
UserSet4 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet5 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet6 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet7 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet8 to save to or load from features
settings previously saved by the user.
A llow s the user to select betw een the
factory set and 1 to 8 user sets to be loaded
at pow er up
Points to w hich user set (1-8) or factory set
that is loaded or saved w hen the
UserSetLoad or UserSetSave command is
used
Loads the camera configuration set
specified by the User Set Selector feature, to
the camera and makes it active. (W)
Saves the current camera configuration to
the user set specified by the User Set
Selector feature. The user sets are located on
the camera in non-volatile memory. (W)
Determine the status of the device using the
'Built-In Self Test'. Possible return values
are device-specific. (RO)
Displays the status of the LED on the back
of the camera. (RO)
Displays the internal operating temperature
of the camera. (RO)
Press to display the current internal
operating temperature of the camera.
Displays the input voltage to the camera at
the pow er connector (RO)
Press to display the current input voltage of
the camera at the pow er connector
53
Device
Version
& View
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
DFN C
Beginner
1.00
DFN C
Beginner
1.00
DFN C
Beginner
1.00
DFN C
Beginner
1.00
DFN C
Beginner
1.00
DFN C
Beginner
03-032-20176-06