Certifications And Compliance; Supported Industry Standards; Responsivity - Dalsa Piranha4 User Manual

10 Piranha4 2K and 4K Dual Line Monochrome CMOS Camera

Certifications and Compliance

Compliance
EN 55011, FCC Part 15, CISPR 11, and ICES-003 Class A Radiated Emissions Requirements
EN 55024 and EN 61326-1 Immunity to Disturbance
RoH S per EU Directive 2011/ 65/ EC and WEEE per EU Directive 2002/ 96/ EC and China Electronic Industry
Standard SJ/ T11364-2006
GenICam XM L Description File, Superset of the GenICam™ Standard Features N aming Convention specification
V1.5, Camera Link Serial Communication: GenICam™ Generic Control Protocol (GenCP V1.0)

Supported Industry Standards

GenICam™
Piranha4 cameras are GenICam compliant. They implement a superset of the GenICam™ Standard
Features N aming Convention specification V1.5.
This description takes the form of an XM L device description file respecting the syntax defined by the
GenA pi module of the GenICam™ specification. The camera uses the GenICam™ Generic Control
Protocol (GenCP V1.0) to communicate over the Camera Link serial port.
For more information see w w w .genicam.org.

Responsivity

The responsivity graph describes the sensor response to different w avelengths of light (excluding lens
and light source characteristics).
Figure 1: Spectral Responsivity vs. Wavelength (Dual Line)
03-032-20176-06 Teledyne DALSA