Frequency Input - AOR AR-DV10 Operating Manual

VFO currently being received
VFO-A selection:
Press [MENU] and [ENT] twice.
VFO-B selection:
Press [MENU] and [ENT]. Then use [▶] to select [B] and press [ENT].
VFO-Z selection:
Press [MENU] and [ENT]. Then use [▶] to select [Z] and press [ENT].
・Press [ENT] to switch between VFO-A and VFO-B.
5.4.

FREQUENCY INPUT

In VFO mode there are 3 ways to adjust a frequency:
A) KEYPAD
Directly enter the frequency in MHz with the keypad and validate with [ENT].
For example to set 439.49MHz:
[4]→[3]→[9]→[ . ]→[4]→[9]→[ENT]
For frequencies under 1MHz, start with [0] [ . ] or just [ . ].
To delete just one digit, use the [◀] key.
To cancel frequency input, press [CLR].
B) DIAL SELECTOR KNOB
Turn the dial selector knob on the top panel to chose the desired operating frequency.
The incremented step per knob click is as per the frequency step displayed at the top
right corner of the screen. (See chapter 5.8 "TUNING STEP" on how to change this step
value.)
C) USING THE [◀] and [▶] KEYS (fast tuning method)
Press [▶] to increase or [◀] to decrease the frequency.
20