11. RECEIVER SETTINGS
11.1. CALENDAR & CLOCK
1.
Press [MENU] and use [▶] to select [CLK] and press
[ENT]
2.
Using the number keys, input the date and time in the
following format:
YY-MM-DD HH:MM
For example for 18-01-30 15:00 (Jan.30, 2018 at
15:00) just enter 1801301500 and validate with [ENT].
If you just want to change the time, proceed as follows:
1.
Press [MENU] and use [▶] to select [CLK] and press [ENT]
2.
Press [▶], this will copy the actual date and time.
3.
Press [◀] four times and input the new time, followed by [ENT].
Note:
There is no daylight saving feature.
The system's date and time will be input in the properties of an audio recording file. However
there is no date and time stamp in the recording's file name.
11.2. SYSTEM SETTINGS
There are 2 receiver configuration pages as follows:
Press [MENU] and use [▶] to select [CONFIG] to open the receiver settings menu.
Select the desired row with [▶] and press [ENT] to select the value on the right side to
be changed.
Change the value by turning the dial selector knob.
Validate with [ENT].
51