Table of Contents
Advertisement
3.2.
BATTERY PACK CHARGING
It is necessary to charge the lithium-ion battery fully before its first use.
1. Install the battery pack onto the receiver. Ensure that the receiver is switched off.
2. Insert the AC power adapter's DC plug into the jack located on the back of the fast
charger cradle, then plug the AC power adapter into the AC line outlet.
3. Insert the receiver into the fast charger cradle as pictured.
You may connect the AC power adapter directly to the receiver, however charging is much
slower.
Approximate charging times of a fully discharged battery pack:
・ AC power adapter connected to receiver:
・ AC power adapter connected to fast charger cradle: 6〜7 hours
Note:
While it is possible to switch the receiver on and operate it while charging the battery pack,
the charging time will be significantly longer.
CC-10
A:
When the AC power adapter is connected directly to the receiver, after approx. 10
seconds the LCD will indicate "CHARGING". Once the battery is fully charged, this
indication will disappear. If the receiver is switched on while the charger is still connected, a
icon will appear on the top of the LCD. A minute later it will turn to
charging status.
Important:
Do not leave the AC power adapter connected directly to the receiver after the charge is
complete, as long term overcharging can degrade the lithium-ion battery pack and
significantly shorten its useful life.
A
AC power adapter connected either directly to the
receiver or to the fast charger cradle.
B
90%charge：8～9 hours
Full charge：11～12 hours
AA-10
15
to indicate a
Hide quick links:
Advertisement
Table of Contents
