Firmware Update - AOR AR-DV10 Operating Manual

13. FIRMWARE UPDATE

■ What do I need?
・ The supplied SD card where you saved the firmware file downloaded at:
http://www.aorja.com/receivers/ar-dv10.html
If your receiver contains a lot of scan and search data, it is advised to have at least 200MB
free space on the card.
■ Words of caution!
・ Your memory data and system systems are very likely to be erased after a firmware
update, therefore it is always advised to first backup your data as follows:
Press and hold the [●] button
Press [2]
Press [6] (SYSTEM means a complete backup)
・ Beware that the backup files will always have the same names, therefore previous
back-ups will be overwritten without warning. Please move previous back-up files to your
PC.
・ Do not cut the power or remove the SD card while the firmware is being uploaded to the
receiver! This could potentially corrupt system data and make the receiver unusable.
Such a happening would not be covered by the manufacturer warranty.
・ The firmware is the property of AOR Ltd. and should not be re-distributed, neither in its
original nor any modified form.
・ AOR will issue firmware updates to fix major bugs and add new functions, whenever
required by our development plan. However there is no guarantee for updates at regular
intervals.
■ Update procedure
1. The receiver must be OFF.
2. Lift the rubber cover labeled MicroSD.
3. Insert the SD card containing the update file (for example
1801C.D10) into the receiver slot. Refer to the illustration
for the SD card's orientation.
4. Switch the receiver ON.
Make sure that you have enough battery power for the update. A power interruption
during the update procedure could potentially corrupt system data and make the
receiver unusable. Such a happening would not be covered by the manufacturer
warranty.
56