Electrolux EVE614 User Manual page 36

36 electrolux.com.au
EVEP616, EVEP618, EVEP626
IMPORTANT
• 30 seconds after a cooking function has
started, it is no longer possible to delay the
end time.
• In order to delay a cooking function that
has already started, the oven needs to be
switched off then switched on again and
re-programmed.
• Even though the heating element turns off the
oven will still retain substantial heat. This will
continue to cook the food until it is removed
or the oven cools down. If you do not plan on
being present when the oven turns off, you
should take this extra heating time
into account.
Timers
The appliance has two timers which can be used one at a
time. The count up timer can be used to measure a period
of time. The count down timer beeps at the end of a
preset time.
Setting the count up timer
The timer can be used independently of the oven for
measuring a count up period. There is no alert provided
with this timer.
1. Touch either 'timer'
2. 00min will be displayed along with a bell and the up
arrow will flash.
3. To begin the count up timer press OK.
4. To reset the count up timer, press 'timer'
show 00min. Press OK to restart.
5. To cancel the count up timer press 'timer'
or
once to
twice.
(CONTINUED)
Setting the count down timer
The timer can be used independently of the oven for
setting a count down period. When the period of time has
elapsed, an audible signal sounds.
1. Touch either 'timer'
2. 00min will be displayed along with a bell and the up
arrow will flash.
3. Touch the 'timer'
4. The timer bell icon
5. To begin the count down timer press OK or wait 8
seconds. When the timer starts, the bell will stop
flashing and the timer will begin to count down.
6. When the set time has elapsed, an audible signal will
sound for 2 minutes. The time indication '00min' and
the timer bell will flash on the display.
7. To stop the signal, touch either of the 'timer'
or symbols.
8. To cancel the count down timer touch 'timer'
the normal time of day is displayed.
Adjusting the clock
1. Switch on the oven by touching 'ON/OFF' symbol.
2. Select 'SETTINGS' from the function list and
touch OK.
3. Select 'SET CLOCK' from the list and touch OK.
4. 'Set Clock' will illuminate under the clock display.
5. Use the timer
current time (including AM/PM).
6. Touch 'OK' when the hours are set correctly.
7. Use the timer
the current time.
8. Touch 'OK' when the minutes are set correctly. TIME
SAVED will be displayed and then the function display
will revert to the 'set clock' menu. Turn the oven off or
it will do so after 8 seconds.
or .
to set the countdown period.
will flash.
and to set the hour portion of the
and to set the minutes portion of
until