16
electrolux.com.au
EVEP614
(CONTINUED)
Adjusting the clock
To change the time, touch and hold the
button until
the clock symbol begins to flash. The hour display will be
ready to change.
+
–
Toggle the temp selector
or
, then touch
when you
have the right hour.
The minutes will flash and can be set in the same manner.
5 seconds after the last change, the clock display will stop
flashing, confirming that the time has been set.
NOTE: The clock has a 24 hour display.
Setting the cook time
1.
Use the knobs to select the desired oven function
and cooking temperature.
2.
Touch the
button as often as necessary, until the
‘cook time’
symbol appears.
3.
Set the desired cooking time commencing with
+
–
minutes by using
or
, whilst the
symbol is
flashing, then touch the
button again and set the
+
–
hours by using
or
. After 5 seconds from the last
time adjustment the
symbol will stop flashing. The
appliance is now programmed and the display will
countdown to zero.
4.
When the set time has elapsed, a signal will sound
and the appliance will turn off. To stop the signal,
touch any button on the clock and then turn the oven
function selector to OFF.
NOTE: Cooking time cannot be set for the Rapid
Heat function.
The feature can be cancelled at any time by returning the
function selector to OFF.
Setting the end time
1.
Use the knobs to select the desired oven function
and cooking temperature.
2.
Touch the
button as often as necessary, until the
‘end time’
symbol appears.
3.
Set the desired end time commencing with hours
+
–
using
or
whilst the
symbol is flashing, then
touch the
button again and set the minutes by
+
–
using
or
. After 5 seconds from the last time
adjustment the
symbol will stop flashing and the
appliance is now programmed.
4.
When the set time has elapsed, a signal will sound
and the appliance will turn off. To stop the signal,
touch any button on the clock and then turn the oven
function selector to OFF.
NOTE: Stop time cannot be set for the Rapid
Heat function.