Electrolux EVE614 User Manual page 58
Hide thumbs
Also See for EVE614:
- Quick start manual (4 pages) ,
- User manual (76 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
58
electrolux.com.au
CLEANING THE APPLIANCE
Replacing door glass panels
1.
Assemble the silicone spacers to the upper corners
of one of the clear glass panels. Position the panel
into the lower position of the door, ensuring the
chamfered corner of the panel is placed in the correct
location as shown in the image below.
Silicone
spacers
2.
Insert the remaining smaller clear glass panel into the
middle position, ensuring the chamfered corner of the
panel is placed in the correct location as shown in the
image below.
Chamfer to be located in this corner
3.
Insert the black bordered glass panel into the upper
position, ensuring the painted surface is facing the
downside as per the image below.
Replacing the top door trim
1.
Hold the top door trim at each side and position it to
the inside edge of the glass with trim vent opening
closest to glass.
(CONTINUED)
2.
Push the trim down with its top edge over the glass
panel until the clip snap in on each side of the trim.
3.
Push the middle of the trim down to ensure it is
straight and firm against the glass panel.
Fitting the oven door
1.
Take hold of the oven door with a hand on each side
and with the door at an angle of 30˚, position the
recesses at the bottom of the door onto the hinge
arms of the oven. Let the door slide down the hinge
arms as far as it will go.
2.
Open the door fully to access the hinges.
3.
Rotate the ‘stirrups’ (see the diagram below) until
they lock into the hook. The oven door may now
be closed.
Stirrup in
locked position
Door
column
Hide quick links:
Advertisement
Chapters
Table of Contents
