Printronix T5000 Series Quick Reference Manual page 35

13. Close the printhead by pressing down on both sides of the front
of the pivoting deck and rotating the deck lock lever
counterclockwise against its stop. This locks the pivoting deck
and printhead assembly into the printing position.
Verify that Print Mode in the Printer Configuration Menu is set
for the media type installed (Direct or Transfer). If Thermal
Transfer media is installed, see "Loading Ribbon" on page 36.
The Print Mode submenu is located in the MEDIA CONTROL
Main Configuration menu. See the User's Manual for more
information.
ATTENTION
Ensure the printhead is down and latched before attempting to
print. Failure to do so will cause a premature failure of the
printhead.
14. Press the FEED key once to verify that the labels advance.
15. Close the printer media cover if the thermal transfer operation
is not needed.
16. Press the PAUSE key to place the printer online.
The printer is now ready for printing.
1
Legend:
1) Pivoting Deck
2) Deck Lock Lever
Loading Fanfold Media
2
35