Honeywell DPR180 Manual page 28

SUB-MATRIX
PCMCIA
Definition:
How to modify it:
Possible choices:
Default value:
SUB-MATRIX
PCMCIA
Definition:
How to modify it:
Possible choices:
Default value:
Note:
SUB-MATRIX
PCMCIA
Definition:
How to modify it:
Possible choices:
Default value:
See also:
* The default value is 0% if the recorder was previously equipped with a firmware revision older than 001AK.
24
PARAMETER
ROLLOVER
Determines if, once the end of archive file has been reached, new data
are copied at the beginning of this file, so that it contains the most
recent data, or not.
Select or not rollover mode
DISABLE
ENABLE
DISABLE
PARAMETER
LOG FREQ
Archive frequency used to log TRENDS files.
Select a new frequency.
1 s
5 s
10 s
15 s
30 s
1 mn
5 mn
10 mn
15 mn
30 mn
10 s
In case of a change in the login frequency on the same file, the SDA
software will make interpolations (depending if that option is configured
or not) to produce a trend at the highest frequency.
It is recommended in that case to read the file without interpolation.
PARAMETER
% FULL
Determines PCMCIA EVENT threshold.
Select a threshold in %.
0 to 100%
90% *
PCMCIA in EVENTS matrix
PCMCIA Option Manual
CLASSIFICATION
♦♦♣♣
CLASSIFICATION
♦♦♣♣
CLASSIFICATION
♦♣